The I/O Expander 12 instantly makes available 12 additional user configurable inputs and outputs. Simply plug in the CAN cable and start using your extra I/O.Features:- 4 x AVI – Analogue Voltage Inputs (0-5V)- 4 x DPI – Digital Pulsed Inputs ( 0-5V – Max Freq 300Hz)- 4 x DPO – Digital Pulsed Outputs (5V / 12V Pull ups – Max 1A)- Broadcast rate of 20mS to the Haltech ECU for each channel.- User definable “Safe State” for each output in case of loss of communications/error.- Switchable pull up resistors on AVI channels for use with temperature sensors.- Power and Status LEDs- Powered by CAN bus. External power only required if DPOs are to be used.- Multiple I/O Expander Boxes can be used on certain Haltech ECUs- 2.5m Flying Lead kitIncluded in the Kit:- Haltech I/O Expander 12.- CAN direct connection cable (600mm)- 2.5m Flying Lead Kit