GARRETT GTX3582R GEN II XR6 TURBO UPGRADES AVAILABLE NOW

We are happy to announce that the all new GEN II GTX3582R Ford Falcon XR6 bolt-on Turbocharger is available now!

Our custom built Garrett GTX3582R GEN II Turbocharger kit has been designed in-house as a bolt-on upgrade for the BA/BF & FG Ford Falcon XR6 Turbo. 

Offering up to 20% more power than the previous version, the GTX3582R GEN II Turbocharger is now rated at up to 850 hp.
This is made possible by a major update to the compressor wheel aerodynamics which was optimized to reach maximum efficiency and mass airflow. The GTX3582R GEN II Turbocharger has the ability to create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle.

Garrett also added a brand new compressor housing featuring a high-flowing design matched perfectly for the new compressor wheel upgrade.

The new compressor housings are equipped with a fully machined speed sensor port that accepts the Garrett by Honeywell speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be easily removed when ready to install a speed sensor kit. 

 

Specifications & Features

• 66mm Comp Inducer, 82mm Comp Exducer
• 68.0mm Turbine
• Ball Bearing
• Oil & Water Cooled
• Option of 1.06 or 1.15 a/r stainless steel Turbine housing 

 

Installation

This turbocharger upgrade will bolt up in place of your factory Turbo with a couple of minor, simple modifications. With the GTX3582R inlet measuring at 4" over the factory turbo 3" inlet a reducer hose will be required. The same also applies for the outlet with the GTX3582R measuring at 2.5" over the factory 2" outlet. 
  
Options

When ordering please specify if you would like a 38mm or 42mm wastegate flapper. 
Also please advise if you would like a 1.06 or 1.15 a/r stainless steel turbine housing. 


If you are interested in purchasing one of these upgrades click on the link below or call us at the workshop on 02 9792 7076 (Trade enquiries welcome)