Having trouble fitting drag slicks under the rear of your RX3 or 808...? These bolt-in Pac Performance leaf spring adjusters are an easy, cost-effective DIY solution.
Search
You have no items in your shopping cart.
Back to the News Archive
Made from strong 6mm steel plate and including all high tensile hardware the Pac Performance Leaf Spring Adjuster kit is a bolt in and go setup making it great for those DIY’ers out there who like to get their hands dirty.
With five adjustment points you have the ability to swap from you low profile street tyres to high profile drag radials or slicks with minimal fuss. All you need to do is jack the car up, remove the bolt from the spring eyelet, select the height you want and bolt it back together. It’s that simple.
Available in raw steel or hard-wearing black powder coat (other colours avail on request) the Pac Performance Leaf Spring Adjusters can be fitted to your car and left on. No need to swap back and forth from the standard setup when you want to go racing or cruise…
In stock and priced at just $195 the Pac Performance Leaf Spring Adjusters are an easy, cost effective way of raising and lowering the rear of your RX3/808 sedan, coupe or wagon
Heavy duty bush kits are also in stock and available to suit.
For more information or to purchase a kit, contact the workshop on 02 9792 7076 or email info@pacperformance.com.au
PAC PERFORMANCE RX3 LEAF SPRING ADJUSTERS
Friday, 14 June 2013
Most RX3/808 owners will be familiar with the issues associated with fitting big rubber under the rear end of the car. Without extensive modification to the wheel arch and wheel tubs it can be very difficult, if not near impossible to fit 26x8.5in and larger slicks without raising the car. That’s where the Pac Performance Leaf Spring Adjusters come in.
Made from strong 6mm steel plate and including all high tensile hardware the Pac Performance Leaf Spring Adjuster kit is a bolt in and go setup making it great for those DIY’ers out there who like to get their hands dirty.
With five adjustment points you have the ability to swap from you low profile street tyres to high profile drag radials or slicks with minimal fuss. All you need to do is jack the car up, remove the bolt from the spring eyelet, select the height you want and bolt it back together. It’s that simple.
Available in raw steel or hard-wearing black powder coat (other colours avail on request) the Pac Performance Leaf Spring Adjusters can be fitted to your car and left on. No need to swap back and forth from the standard setup when you want to go racing or cruise…
In stock and priced at just $195 the Pac Performance Leaf Spring Adjusters are an easy, cost effective way of raising and lowering the rear of your RX3/808 sedan, coupe or wagon
Heavy duty bush kits are also in stock and available to suit.
For more information or to purchase a kit, contact the workshop on 02 9792 7076 or email info@pacperformance.com.au
