An advanced microprocessor controlled battery charger, the CTEK MXS 5.0 offers unrivalled performance for lead acid batteries from 1.2-110Ah. The MXS 5.0 features battery diagnosis to establish whether your battery can receive and retain a charge as well as CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. further maximising their performance and lifespan!
Operation is a simple plug & play scenario, you don't even need to disconnect the battery from the vehicle! At charge start, the CTEK MXS 5.0 will automatically reset any low voltage protection electronics (Battery Management System) fitted - It's a fully automatic "connect and forget" charger that's splashproof and dustproof (IP65), easy and safe to use, protects vehicle electronics, spark-free, reverse polarity protected and short circuit proof and also features CTEK's trusted 5 - year warranty.
Add some protection for your new Ctek batery charger with a Ctek Bumper60 Rubber Protection cage - see extras tab
Specifications:
Volts: 12V
Rated Voltage AC: 220V - 240V, 50Hz - 60Hz
Charging Current: 14.4/14.7/15.8 V, 5.0 A
Back Current Drain: <1Ah/month 4A Max
Ripple: <4%
Ambient Temp: -20C to +50C (output power is reduced automatically at high temps 1.2A rms at full charge current)
Charger Type: 8 step fully automatic charging cycle
Battery Types: 12 V:; WET; MF; Ca/Ca; AGM; GEL
Battery Capacity: 1.2–160 Ah
Insulation Class: IP65
